Abstract
Embedding p-type gallium nitride (p-GaN) in AlxGa1-xN-based thin films has garnered significant interest as a versatile structure for bandgap engineering such as tunnel/super-junctions or current blocking/guiding functions in electronic devices. However, Mg, a p-GaN dopant, has an undesirable diffusive capacity into the nearby thin films at a high growth temperature (>1,000°C), resulting in structural challenges in device design. This study systematically investigated the low-temperature GaN (LT-GaN) layer regrown on p-GaN that suppresses Mg diffusion according to metal–organic chemical vapor deposition growth conditions. Prototype Al0.3Ga0.7N (40 nm)/GaN (140 nm) high-electron-mobility transistors (HEMTs) were regrown with LT-GaN on p-GaN (300 nm), and a high two-dimensional electron gas (2DEG) density of 3.13E12 cm−2 was achieved by inserting a 100-nm-thick LT-GaN layer grown at 750°C; in contrast, only 1.76E10 cm−2 2DEG density was obtained from Al0.3Ga0.7N/GaN HEMTs regrown directly on p-GaN (Mg: 4.0E19 cm−3). The fabricated Al0.3Ga0.7N/GaN HEMTs with 100-nm-thick LT-GaN demonstrated a high drain current density of 84.5 mA/mm with a low on-state resistance of 31 Ω·mm. The AlxGa1-xN/LT-GaN/p-GaN platform demonstrated here paves the way for various III-nitride-based structures with embedded p-GaN.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.