Abstract
The performance of a particular class of fuel injectors for scramjet engine applications is addressed. The contoured wall injectors were aimed at augmenting mixing through axial vorticity production arising from interaction of the fueVair interface with an oblique shock. Helium was used to simulate hydrogen fuel and was injected at Mach 1.7 into a Mach 6 airstream. The effects of incoming boundary layer height. injector spacing, and injectant to freestream pressure and velocity ratios were investigated. Results from threedimensional flow field surveys and Navier-Stokes simulations are presented. Performance was judged in terms of mixing, loss generation and jet penetration. Injector performance was strongly dependent on the displacement effect of the hypersonic boundary layer which acted to modify the effective wall geometry. The impact of the boundary layer varied with injector array spacing. Widely-spaced arrays were more resilient to the detrimental effects of large boundary layers. Strong dependence on injectant to free stream pressure ratio was also displayed. Pressure ratios near unity were most conducive to losseffective mixing and strong jet penetration. Effects due to variation in mean shear associated with non-unity velocity ratios were found to be secondary within the small range of values tested.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
