A synergistic approach to enhance sensitivity and selectivity of room temperature operable ammonia gas sensor with humidity assistance using RGO/WO3 nanocomposite

Abstract

In this study, the fabrication of an ultrahigh selective NH3 gas sensor based on RGO/WO3 nanocomposite has been proposed. The hydrothermal method was employed to synthesize the RGO/WO3 nanocomposite. The formation of RGO/WO3 nanocomposite and the elemental composition, structure and morphology of the as-synthesized materials were confirmed through an array of analytical techniques, including XRD, Raman, FT-IR, XPS and TEM. For gas sensing applications, pure RGO and RGO/WO3 have effectively spin-coated onto the interdigitated electrodes (IDE’s) based on fluorine doped tin oxide (FTO) respectively, and their sensitivity towards NH3 was tested. Gas sensing characteristics of prepared materials were analyzed at room temperature (25 °C) under different relative humidity (RH) levels. The developed RGO/WO3 sensor was subjected to different NH3 concentrations, demonstrating a high sensing response of 89% towards 500 ppm NH3 under 11%–97%–11% RH conditions. Notably, the sensor exhibited rapid response and recovery times with an average response time of 92 s and recovery time of 26 s when exposed to 500 ppm NH3 under the specified RH conditions. To gauge the material selectivity, the prepared nanocomposite was exposed to a range of volatile organic compounds and the results showcased the sensor’s remarkable selectivity and sensitivity specifically toward NH3 vapor. This superior performance can be attributed to the abundant active sites and the excellent electron transport properties inherent to the RGO component. Importantly, the RGO/WO3 sensor displayed high reproducibility and consistent responses, with minimal degradation (1.98% degradation) over 30 d at 11%–97%–11% RH. Furthermore, we examined the sensor’s response with varying levels of relative humidity to assess its potential for real-world applications. The sensor exhibited extremely low power consumption, outperforming a commercially available metal oxide sensor while operating at ambient temperature. The robust performance of RGO/WO3 coupled with low power requirements and ambient temperature operation, positions it as a promising candidate for next-generation gas sensing technologies.