A subchannel analysis code for advanced liquid metal fast reactor cores and study on heat transfer characteristics of core geometry parameters

Abstract

The liquid metal fast reactor represents an important reactor type for the future development of nuclear energy. Accurately modeling and predicting the subchannel flow and heat transfer phenomenon in the rod bundles plays a key role in ensuring core safety. Consequently, a subchannel code suitable for the liquid metal fast reactor is analyzed based on the subchannel analysis code of the Pressurized Water Reactor (PWR). The modified code incorporates various types of liquid metals, such as lead, lead-bismuth eutectic (LBE), and sodium, along with their constitutive models, enhancing the applicability of the liquid metal reactor systems. This code has been verified and validated at several levels, including comparing the code simulation results with other similar subchannel codes results, high-dimensional Computational Fluid Dynamics (CFD) simulations, and experiment data. The sensitivity analysis of core geometric parameters and turbulent mixing coefficients is performed based on the modified version code. The influence of the core geometry, including the rod Pitch to Diameter ratio (P/D), Rod to Wall gap (RTW) and the wire wrap pitch (H) on the sensitivity of outlet temperature has been investigated. The results show that the new subchannel analysis code suitable for liquid metal cooled reactor shows reasonable agreement with the verified and validated results. The geometric parameters, such as P/D, RTW and H have noticeable effects on the outlet temperature difference of the subchannels. Additionally, the outlet temperature distribution in the subchannel is significantly affected by different turbulent mixing coefficients and the distribution of the turbulent mixing coefficient also influenced by the reactor core sizes. Overall, this study could support the rod bundles design and safety analysis in the liquid metal reactors.