A study on thermophysiological comfort properties of fabrics in relation to constituent fibre fineness and cross-sectional shapes

Abstract

The present study reports the effect of linear densities and profiles of polyester fibres on the physiological properties of their fabrics. Four different polyester fibre finenesses along with microdenier and four cross-sectional shapes (circular, scalloped oval, tetrakelion and trilobal) were selected to produce two sets of 2/1 twill fabrics; one composed of 100% polyester and the other 67:33 P/V blends. In studying the thermophysiological component of the clothing comfort, heat, air and moisture transmission characteristics of the fabrics were assessed. The principal thermal properties, such as thermal absorptivity, thermal resistance and thermal conductivity, were experimentally evaluated, using the Alambeta instrument. The study of the obtained results established the fabrics of non-circular cross-sections as against circular ones, and increase in the linear density results in higher thermal resistance, lower thermal conductivity and lower thermal absorptivity. Wicking behaviour of fabrics was studied under two conditions–wicking from an infinite liquid reservoir (transverse wicking) and wicking from a finite liquid reservoir (single drop wicking into the fabrics). Increase in fibre linear density enhances transplaner wicking but slows down the spreading speed of water drops. Air permeability and moisture vapour permeability are found to be positively correlated with fibre decitex. The role of fibre cross-sectional shapes in influencing mass-flow characteristics is quite considerable. Use of non-circular polyester in place of a circular one augments the wickability of liquid water along with the permeability of air and moisture vapour through the fabrics, revealing their high porosity, which assists air and moisture to propagate. Mixing viscose into polyester brings down the air permeability and moisture vapour transmission rate (MVTR) of fabrics. Results show that moisture absorption of viscose is an important factor in influencing the moisture transport characteristics including both wickability and MVTR of 100% viscose and P/V-blended fabrics.