A study on the wear behavior of tin-based journal bearing under different working conditions

Abstract

PurposeThe purpose of this paper is to study the friction and wear properties of journal bearings under different working conditions.Design/methodology/approachFriction coefficient and wear losses of journal bearing under different working conditions have been determined by a bearing test rig. The worn surfaces of bearing were examined by scanning electron microscopy and laser three-dimensional micro-imaging profile measurements, and the tribological behavior and wear mechanisms were investigated.FindingsThe wear loss and friction coefficient of bearing under starting-stopping working condition is far greater than that of steady-state working conditions. In addition, the maximum wear loss under start-up and stop conditions is about 120 times of that under stable operating conditions. Under stable working conditions, the main wear forms of bearings are abrasive wear, under starting-stopping working conditions the main wear mechanisms of bearings are adhesion wear, abrasive wear and fatigue wear.Originality/valueThese research results have certain practical value for understanding the tribology behavior of journal bearings under different working conditions.