Abstract
The quality of the finished product is affected by a number of factors during the plastic injection molding process. Two crucial process variables in the creation of products are melted and mold temperature. The study uses the Design of Experiments tool in Autodesk Moldflow to look at the impact of melt and mold temperatures on injection molding technology. Analytical items are specifically made of polypropylene (PP) using kids' chair mold. According to simulation analysis results, there is a remarkable effect of the melt temperature on both time at end of packing as well as deflection in the range of the analytical temperature at tmold of [40, 80]°C and tmelt of [180, 220]°C. Melt temperature also shows a notable influence not only on deflection but also on sink mark depth and volumetric shrinkage, along with the criteria to evaluate the expense of a product (time at end of packing, total part weight).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
