Abstract
As part of the project on developing methods for removing hydrogen and tritium from the circulation circuits of reactor plants with heavy liquid metal coolants, the authors studied the kinetics of bismuth oxide reduction by hydrogen in the temperature range of 425–500 °C and hydrogen concentrations of 25–100 vol.%. The kinetic characteristics of the test reaction were determined by continuous measurements of the water steam (reaction product) concentration in mixtures of hydrogen with helium that passed through a heated reaction vessel with a sample of bismuth oxide. The water steam concentration was measured by a thermal-conductivity detector. The obtained time dependences of the bismuth oxide reduction degree (with varying reaction conditions) were processed by the affine time transformation method. It was also found that the reduction process ran in kinetic mode. The reduction mechanism is the same in the entire temperature range. The limiting reaction stage is the adsorption of hydrogen on the surface of the bismuth oxide sample. The time dependence of the reduction degree is in good agreement with Avrami-Erofeev equation with n = 1. The reaction activation energy is 92.8 ± 1.9 kJ/mol. The reduction reaction rate is directly proportional to the concentration of hydrogen in its mixture with an inert gas.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.