Abstract
Fiber reinforced composite materials have been increasingly used as structural material in airplanes, in space applications, and in robot arms because of their high specific stiffness and strength. Structural design and nondestructive test techniques have evolved as increased emphasis has been placed on the durability and damage tolerance of these materials. There are several methods used to detect damaged regions of composite materials. Acoustic emission is one of these. It is a suitable technique for detection of a wide range of micro-structural failures in composite materials. In this paper, an AE signal analyzer was designed and fabricated with a resonance circuit to extract the specified frequency of an acoustic emission signal. From the tests that were completed, the disturbance noise levels, such as impact or mechanical vibration, of the fabricated AE signal analyzer had a very small value in comparison to those of the conventional AE signal analyzer. Also, the fabricated AE signal analyzer was proven to have generally the same crack detection capabilities as a conventional AE signal analyzer, under static and dynamic tensile tests of the composite materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.