Abstract

We have studied the method to improve the illumination efficiency in DFE with optical illumination design software. We have showed the result of illumination efficiency according to the change of geometrical shape in distal tip of plastic optical fiber (POF). We simulated the illumination efficiency in the case of the polished POF distal tip and the unpolished one, respectively using optical illumination system design software. We obtained the illumination efficiency was increased by about 46 percent in the polished distal tip more than in the unpolished distal tip when a light emitting diode (LED) was directly excited to the distal tip of POF. In order to demonstrate the simulated results, we showed the polishing fabrication of the distal tip in POF and have measured the illumination efficiency of the polished POF using LED. The measured results showed that illumination efficiency was increased by about 23 percent in the polished distal tip more than in the unpolished distal tip of POF. We have demonstrated the optimized geometrical shapes of the POF for minimization of the illumination loss. We have suggested the method to improve the illumination efficiency by 69 percent for a single fiber illumination delivery system of DFE.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.