Abstract
A 2D model of laser melting consisting of heat transfer, hydrodynamic flow, surface tension, and a free surface motion was established. A physical field simulation of the laser melting process was performed, and the effect of steady magnetic field parameters on the internal flow and temperature fields of the melt pool was analyzed and validated by experiments. The results show that the steady magnetic field can suppress the melt pool flow rate, but slightly influences its temperature field, and with an increase in the magnetic field strength, the ripples on the melting surface decrease with increasing magnetic flux density. Compared with the molten pool depth experiment results, the simulation molten pool depth was 792 μm, representing a difference in value of 13.5%. The surface ripples of the molten pool fluctuated greatly in the absence of a magnetic field, while the surface ripples were suppressed when the magnetic flux density was 2T. This is consistent with the simulation results, thus effectively demonstrating the simulation model’s accuracy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
