A Study on the Calibration of Wheat Seed Interaction Properties Based on the Discrete Element Method

Abstract

The interaction properties of the seeds have to be calibrated to simulate the realistic behavior of the seed bulk. Here, a simple and accurate calibration method of DEM interaction properties of seeds with adequate equipment to simulate each seed’s behavior remains a challenge. In this research, the rotary drum is chosen as simple equipment to calibrate particle–particle and particle–material interaction properties, as there is a lack of research on whether the rotary drum is adequate equipment to calibrate particle–material interaction properties. Therefore, this article calibrates particle–particle and particle–material static and rolling interaction coefficients using a rotary drum. The calibration of particle–material static and rolling friction coefficients are described using the rotating drum with a 45 degrees inclination. The particle–particle static and rolling friction coefficients were calibrated according to the angle of repose when the rotary drum is vertical.