Abstract
AbstractThe application of a novel composite MIL88A(Fe)/TiO2 for phenol removal in a new hexagonal photoreactor design was investigated. The unique hexagonal shape of the reactor increases the surface area available for irradiation, leading to more efficient removal of contaminants. The composite was characterized using X ray diffraction (XRD), Fourier transform‐infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) images to determine its properties. Photocatalyst dosage, reaction time, phenol concentration, pH, and mL H2O2/L PW (phenol wastewater) were chosen as effective parameters on the process. To plan an experiment and maximize phenol removal, the response surface methodology (RSM) was applied. Ideal conditions for optimum efficiency (95.96%) include initial phenol concentration of 58 mg/L, pH of 7.51, reaction time of 68.61 min, mL H2O2/L PW of 0.18, and catalyst dosage of 0.4 g/L PW. Trapping experiments prove that ˙O2 and ˙OH produced in Fenton and photocatalytic processes are the predominant active radicals in this process. The kinetics was fitted with the first‐order, second‐order, n‐order, and Langmuir–Hinshelwood models using nonlinear least squares techniques. The n‐order model with n = 0.54 was found to be the most suitable model (R2 0.998), with a model constant of k = 0.11 (mol0.46/L0.46.s).
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
