Abstract
Abstract (La, Ce, Pr, Nd) 2 MgNi 9 hydrogen storage alloys were prepared through induction melting followed by a long annealing treatment. The structure and electrochemical properties of annealed alloys have been investigated by orthogonal design experiments. Both the individual effects of each substituting element and their interaction in alloys were studied systemically. It has been shown that the structure of main phase in alloys belongs to PuNi 3 -type with a space group R -3 m . Substituting rare-earth elements have a significant effect on both the phase structure of alloys and microstructure. The anisotropic change in the crystal structure of alloys can cause the acceleration of pulverization of alloy particles and result in the deterioration of the cyclic stability of alloy electrodes. Misch metals can raise the plateau pressure of hydrogen absorption/desorption. The discharge capacity of alloy ranges from 342.97 to 380.68 mAh g −1 depending on the sort and content of substituting elements. Both cerium and neodymium can obviously reduce the discharge capacity of alloy electrodes. When compared to the La 2 MgNi 9 alloy electrode, mish metals can significantly improve the high rate dischargeability of alloy electrodes. The improvement of the kinetic characteristic of alloy electrodes mainly results from the increase of the hydrogen diffusion rate in alloy bulk.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.