Abstract
Normally, the design slamming pressure on the bottom of a semi-submersible-type floating rig is determined in a simple way using the relative speed obtained from an air-gap analysis. However, few studies have taken a thorough, robust, and deep-background approach to the estimation of design pressure. To investigate the slamming pressure on the bottom of a semi-submersible rig, a simplified deformable stiffened plate of a zero-degree deadrise angle is simulated using the nonlinear FEM software LS-DYNA, which can take the influence of fluid–structure interaction (FSI) into account. Various parametric studies are carried out to examine the effects of structural flexibility, coupling stiffness, mesh size, velocity, stiffener size, and air cushion. The pressure response on the plate by the coupling of fluid and structure is studied and the FSI effect of each parameter is discussed. Then, equivalent transient and static loads that result in the same maximum or permanent deformation as FSI are evaluated for design purposes through a series of parametric studies.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
