A study on particle size of slag on properties of magnesium potassium phosphate cement

Abstract

AbstractMagnesium potassium phosphate cement (MKPC) presents a broad application prospect in engineering fast repairing, reinforcement, hazardous material, and national defense construction, due to its good properties such as fast hardening and early strength, high bonding strength, and wide environmental adaptability. In this work, the effect of slag with different particle size on the workability, mechanical properties, and hydration products of MKPC was investigated. The results showed that the compositions of slag in the particle size range 75–300 µm are quite different. A decrease in the particle size of slag resulted in reduction of the fluidity of MKPC from 175 to 108 mm and shortening the setting time from 1300 to 850 s. The compressive strength of MKPC (curing for 3 h) does no change much as the particle size of slag varies, and slag with the particle size in the range of 115–300 µm slightly increase the 3‐h‐compressive strength of MKPC, since the compressive strength values are in the vicinity of 13 ± 2 MPa. As the curing age increases, physical effect and hydration activity of slag concurrently dominate the mechanical properties of MKPC, and when the hydration activity of the slag exceeds the adverse effect caused by fine particles, the compressive strength increases. Slag particle size can significantly improve the long‐term compressive strength of MKPC, which can effectively reduce the cost and can be used as a repair material with better durability.