Abstract

AbstractA new type of flexible explosive(HFE) with high energy and low vulnerability based on H‐RDX(High‐quality RDX) was proposed. Fundamental characterizations of H‐RDX, including infrared testing and particle size measurement, were carried out. The technological parameters of the process were researched. Mechanical sensitivities were characterized by impact sensitivity tester and friction sensitivity tester on the base of the explosion probability method. Energetic properties containing densities, initiation properties, and detonation velocities were investigated. For comparison, normal RDX was introduced. It is concluded that HFE with great flexibility was obtained under the sulfuration condition of 80 °C, 10d. The surface of H‐RDX is smoother with fewer defects and a smaller specific surface, leading to the better safety performance of HFE. The impact and friction sensitivities of HFE were 50 % and 22 % less than those of RDX‐based flexible explosive, respectively. Moreover, higher densities and a 6∼19 % rise in detonation velocities indicate that HFE(6700∼7500 m ⋅ s−1) has better energy performance. The precise incision was realized as the dosage of HFE rose(thickness, from 3 mm to 5 mm). The waterproofness of HFE was also tested by the detonation of the sample(submerged in 1 m water for 24 h) with the optimum proportion of the formula(explosive/rubber/functional agents=92/6/2). An excellent application prospect of the flexible explosive was observed in this work.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call