Abstract

 
 
 
 In this research study composite materials (Epoxy resins / multi walled carbon nanotubes) were prepared by mixing ratio of multi walled carbon nanotubes (MWCNTs) (1,2,3 and 4 %wt.). The techniques were implemented by mixing blend epoxy resins with MWCNTs through magnetic stirrer for 15min. Homogenize the blend was carried out using the homogenizer equipment ultrasonic liquid processor with high-intensity for 5min and followed by the addition of the hardener to the mixture. The molds prepared by casting EP/MWCNTs composite.
 The electrical conductivity of EP/MWCNTs composite was obtained by A.C equipment. The results showed that there was an evolution from insulator state to semiconductor state when increasing the mixing ratios of MWCNTs. The electrical conductivity was improved by three orders than samples of pure epoxy resins matrix.
 
 
 
 
 DOI: http://dx.doi.org/10.31257/2018/JKP/2022/140104
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
