Abstract
Biodiesel is one of the promising renewable sources to fulfill the future energy demand of the world. Sustainable feedstock for biodiesel production is one of the major criteria to ensure the process of renewability. Chicken fat is an encouraging feedstock for biodiesel. In this study, waste chicken fat was converted to biodiesel via catalysed transesterification. Optimised process parameters were recorded at 1:4 oil-to-methanol volume ratio and 0.5 wt% KOH catalyst concentration with a biodiesel yield of 96%. The FT-IR spectral analysis of chicken fat and chicken fat biodiesel confirmed the conversion of chicken fats into biodiesel. The physico-chemical properties of biodiesel were tested in accordance with ASTM D6751 and EN 14214 biodiesel standards. The specific fuel properties of chicken fat biodiesel that include calorific value, viscosity and acid value were found to be lower than that of petrodiesel. The diesel engine performance tests confirmed that the biodiesel blends performance was similar to petrodiesel. It is noted that while the brake horsepower increased with the increase of biodiesel blending percentage, the engine power output was found to decrease. Specific fuel consumption also increased along with the biodiesel blending percentage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Automotive and Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
