A study of variables that affect the process of sulfate attack of cement‐based materials subjected to stray current

Abstract

AbstractDurability is one of the most important considerations for subway structures. However, the cement‐based materials used in subway engineering can be jeopardized by sulfate and the stray current and therefore can be subjected to severe damage during service. This study aims to investigate the degradation process of cement‐based materials exposed to stray current and external sulfate. In particular, the effects of three key variables were evaluated: concentration of external sulfate solution, level of stray current and cement type. After exposure, the visual appearance, compressive strength, SO42− profiles and microstructure of cement‐based materials were analyzed. Moreover, the amounts of degradation products were measured to evaluate the influencing degree of different variables and further explain the degradation mechanisms. Experimental results of this study reveal that (a) sulfate attack was related to the external sulfate concentration, but the relation was changed due to the presence of stray current. One explanation is that sulfate ions can be quickly accumulated in the pores of cement‐based materials under the effect of stray current, which makes the chemical reaction of sulfate attack exchange from diffusion control to reaction control. (b) Stray current could accelerate external sulfate attack of cement‐based materials, and the greater the stray current, the more severe sulfate attack was induced. (c) Compared with P·I type cement, high sulfate resistant (HSR) cement showed a better resistance to external sulfate attack. (iv) And, the main degradation products, ettringite and gypsum, were observed in specimens after exposure. Additionally, stray current might induce the decomposition of ettringite. It should be paid more attention on the durability of cement‐based materials exposed to the coupled conditions of stray current and sulfate.