A Study of Vacuum-Drying Characteristics of Sugi Boxed-Heart Timber

Abstract

In this study, we evaluated the effects of drying under atmospheric and vacuum pressure on the drying time, checking, and color change of sugi boxed-heart timber dried at the same dry-bulb temperature and the same wet-bulb depression. The results obtained were as follows: Sugi boxed-heart timber specimens dried at any temperature under vacuum pressure had a shorter drying time than the specimens dried under atmospheric pressure. At moisture content above fiber saturation point and at the same dry-bulb temperature, the specimens dried under vacuum pressure had a drying rate that was almost twice as fast as that of the specimens dried under atmospheric pressure. Sugi boxed-heart timber specimens dried under both atmospheric and vacuum pressure at a higher drying temperature had a shorter drying time than the specimens dried at a lower drying temperature. Apart from the sugi boxed-heart timber specimen dried at a temperature of 100°C under atmospheric pressure, no surface checks were observed for the specimens dried under vacuum pressure or at the other temperatures dried under atmospheric pressure. Slight internal checks were observed in sugi boxed-heart timber specimens dried at a temperature of 100°C under both atmospheric and vacuum pressure. After planer shaving, there was no significant difference between kiln drying under atmospheric pressure and that done under vacuum pressure in terms of the color change (ΔE*) for both sapwood and heartwood of sugi boxed-heart timber specimens.