A study of the stabilization and solidification of heavy metals in co-vitrification of medical waste incineration ash and coal fly ash

Abstract

Medical waste incineration ash (MWIA) has significant concentrations of heavy metals, dioxins, and chlorine that, if handled incorrectly, might cause permanent damage to the environment and humans. The low content of calcium (Ca), silicon (Si), and aluminum (Al) is a brand-new challenge for the melting technique of MWIA. This work added coal fly ash (CFA) to explore the effect of melting on the detoxication treatment of MWIA. It was found that the produced vitrification product has a high vitreous content (98.61%) and a low potential ecological risk, with an initial ash solidification rate of 67.38%. By quantitatively assessing the morphological distribution features of heavy metals in ashes before melting and molten products, the stabilization and solidification rules of heavy metals during the melting process were investigated. This work ascertained the feasibility of co-vitrification of MWIA and CFA. In addition, the high-temperature melting and vitrification accelerated the detoxification of MWIA and the solidification of heavy metals.