A study of the intermolecular branch frequency dependence of tie-chain concentration in single-site linear low-density polyethylene blown films by a new FTIR method

Abstract

The relative concentrations of tie chains (TCs) in six single-site linear low-density polyethylene blown films (LLDPE) were measured using a polarized Fourier transform infrared (FTIR) technique along with a newly developed sample preparation strategy. Before the FTIR measurements, the films were first subjected to a tensile strain of 20% using a homemade appliance and then annealed at a temperature of 60 °C over a time period of 24 h to relax all nonTCs in the amorphous phase. The relative TC concentrations were inferred from the FTIR measurement of the orientation order of the amorphous chains in the stretched films. It is believed that a greater concentration of TCs leads to a higher orientation order for the amorphous chains. The results showed that the quantity of TCs is essentially determined by the chains with the appropriate branch frequency (∼12 branches per 1000 backbone carbons based upon the films used in this work), especially those of the high molar mass chains as formation of TCs requires suitable ethylene sequence lengths between branches. The dart impact strength of the films appeared to be positively related to the relative concentration of TCs; films with greater concentrations showed higher dart impact strength. No clear correlations were observed between the relative concentration of TCs and the tear resistance of the films. However, the TC concentration seems to be related to the magnitude of the difference between the transverse direction and machine direction tear resistance.