Abstract
In order to clarify the influence of humidity on the coefficient of friction and brake squeal generation, a series of brake rig tests has been performed. The influence of both air humidity and pad humidity was evaluated. The results show that, between 20 and 80 per cent relative humidity, air humidity has a limited influence on the coefficient of friction. Nevertheless, in a humid atmosphere the friction coefficient was considerably lower than in a wet environment for two of the pads and higher for one pad. This is believed to be an effect of different mechanisms of tribofilm formation on the pad surfaces. The tribofilm observed on the pads mainly consists of iron oxide originating from the disc. The film is more easily formed in dry environments and preferentially by the pads with low metal content. The friction increase often seen during each individual stop is slightly lower at high air humidity. This effect is more pronounced for the pads with high metal content. Generally, the pads with smooth surfaces were less sensitive to changes in humidity. Only a limited correlation was found between relative humidity and brake squeal generation. One of the pads generated considerably more squeal in low humidity. None of the pads showed the opposite behaviour.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.