Abstract
Renewable energies are foreseen as a major energy resource for next generations. Among several energy sources and technologies available, Concentrated Solar Power (CSP) technology has a great potential, but it needs to be optimised, in particular to reduce the costs, with an increase of the operating temperature and long term stability. This goal can be achieved by tailoring the composition and multilayer structure of films. In this work we present and discuss the results obtained from solar absorber coatings based on nitride/oxynitride structures. A four-layer film structure, W/CrAlSiNx(HA)/CrAlSiNxOy(LA)/SiAlOx, was deposited on stainless steel substrates using magnetron sputtering deposition method. Simulations were performed to establish the best spectral properties of the multilayer stacks with optical constants of single layers and film thickness. The elemental analysis was performed using Rutherford Backscattering Spectrometry (RBS) and Time of flight Elastic Recoil Detection Analysis (TOF-ERDA). To assess the thermal stability of the coatings the samples were thermal annealed at 400 °C, in air, and at 600 °C, in vacuum. The results obtained by RBS and TOF-ERDA reveal good oxidation resistance and thermal stability. Also, the optical measurements confirm the potential of these materials for the use in CSP technology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
