Abstract
A number of airborne plume sampling experiments designed to examine the importance of sulfate particle-generating chemical reactions within coal-burning power station plumes are described. The flights were conducted downwind of the Keystone Generating Station in western Pennsylvania, with The Penn State University research aircraft, an Aerocommander 680E. On-board aerosol sampling instrumentation included a condensation nucleus counter, an optical particle counter and an electrical aerosol analyzer. A casella cascade impactor containing electron microscope copper grids coated with carbon film was used to collect particles at varying distances from the stacks. These samples were analyzed for sulfate content and particle size distribution. Measurements of SO 2 were made with a rapid-response pulsed fluorescent analyzer. Atmospheric pressure, temperature, dewpoint, winds and aircraft position were also monitored. For each flight, a vertical spiral aircraft sounding was made upwind of the power station to determine atmospheric stability and background aerosol particle and SO 2 concentrations. Downwind, the flight pattern consisted of a series of cross wind and longitudinal plume penetrations out to distances at which SO 2 reached background levels. During the case in which cooling tower plume and stack plume merger occurred, sampling continued out to regions where the liquid plume had dissipated. It was found that when relative humidity was low, stability near-neutral and solar radiation intense, the production of new Aitken particles was the primary mechanism of SO 2 oxidation. In the case of merger between the stack plume and the cooling tower plume, the formation of sulfate on pre-existing particles predominated over the formation of new particles. During cases with intermediate meteorological conditions both processes were of equal importance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.