Abstract

Residential energy consumption accounts for more than 40% of the total energy consumed in the world. The residential sector is the biggest consumer of energy in every country, and therefore focusing on the reduction of energy consumption in this sector is very important. The energy consumption characteristics of the residential sector are very complicated and the variables affecting the consumption are wide and interconnected, so more detailed models are needed to assess the impact of adopting efficient and renewable energy technologies suitable for residential applications. The aim of this paper is to review some of the techniques used to model residential energy consumption. They are gathered in two categories: top-down and bottom-up. The top-down approach considers the residential sector as an energy sink and does not take into account the individual end-uses. The bottom-up approach uses the estimated energy consumption of a representative set of individual houses and extrapolates it to regional and national levels. Based on the strengths, shortcomings, and purposes, an analytical review of each technique, is provided along with a review of models reported in the literature.

Highlights

  • Residential Building Energy Consumption (RBEC) is defined as the energy consumed by households excluding transportation uses

  • Top-down models are used mostly for supplying analysis based on long-term projections of energy demand by taking in account the historical response

  • Bottom-up statistical models are used to identify the energy demand contribution of end-uses by introducing the behavioral aspects based on the data obtained from energy authorities and surveys

Read more

Summary

A Study of Modeling Techniques of Building Energy Consumption

Abstract—Residential energy consumption accounts for more than 40% of the total energy consumed in the world. The residential sector is the biggest consumer of energy in every country, and focusing on the reduction of energy consumption in this sector is very important. The aim of this paper is to review some of the techniques used to model residential energy consumption. They are gathered in two categories: top-down and bottom-up. The top-down approach considers the residential sector as an energy sink and does not take into account the individual end-uses. The bottom-up approach uses the estimated energy consumption of a representative set of individual houses and extrapolates it to regional and national levels.

INTRODUCTION
OVERVIEW OF MODELING METHODOLOGIES
RESIDENTIAL ENERGY USE MODELING METHODOLOGIES
Top-down Models
Bottom-up Models
Findings
CONCLUSION
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.