A study of micropool lubricated cutting tool in machining of mild steel

Abstract

This paper presents an experimental study of the performance of micropool lubricated cutting tool in machining mild steel. Microholes are made using femtosecond laser on the rake face of uncoated tungsten carbide (WC) cutting inserts. Finite element analysis is conducted to assess the effect of microholes on the mechanical integrity of the cutting inserts. Liquid (oil) and solid (tungsten disulfide) lubricants are used to fill the microholes to form micropools. A comparative study is conducted between micropool lubricated (surface-textured) cutting tools and dry/flood-cooled conventional (untextured) cutting tools. Three cutting force components are measured and compared. Tool–chip contact length and chip morphology are examined using optical microscope. It is found that the mean cutting forces ( F f, F t, and F c) are reduced by 10–30% with micropool lubrication. The chip–tool contact length is reduced by about 30%. Coiling chips are produced with micropool lubricated cutting tool while long and straight chips are formed with the conventional cutting tool. Liquid and solid lubricants are found to be equally effective in reducing the contact length and coefficient of friction at the chip–tool interface. There is no adverse effect on the performance of the insert with microholes on the rake face.