Abstract
AbstractTo understand the hot corrosion mechanism of materials it is of significance to establish electrochemical measurements under a thin film of fused salts. In this paper, the hot corrosion behavior of Fe-Cr alloys containing 5, 10 and 25wt% Cr, respectively, in the presence of a fused film of 0.9Na2SO4-0.1K2SO4 (mole fraction) at 1173 K in air has been investigated by electrochemical impedance spectroscopy using a two-electrode system. The Nyquist plots for the corrosion of both Fe-5Cr and Fe-10Cr are composed of a very small semicircle at high frequencies and a line at low frequencies indicating that the corrosion is controlled by the diffusion of oxidants in the fused salt film. The alloys were severely corroded, forming a thick porous corrosion layer containing large amounts of non-protective precipitated Fe oxide particles. Conversely, the Nyquist plots for the corrosion of Fe-25Cr are composed of double capacitive loops, with significantly larger impedance values, which are associated with the formation of a protective Cr2O3 scale. Based on the experimental diffusion impedance results and the theoretic solubility and diffusion coefficient of oxygen in molten salts, respectively, a theoretical value of the diffusion flux of molecular O2 has been calculated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
