Abstract
The purpose of this study is to investigate gas permeation behaviour of five gases (CO2, He, H2, N2 and Ar) across two silica modified ceramic membranes, Membrane Y and Membrane Z. An examination of the variations in their layer thickness and flow rate was determined. Solution-dip coating process was used for the modification process specifically for pore size reduction. This resulted in some level of modifications in the layer thickness after a successive dipping time as well as flow rate in relation to pressure drop. The effect of number of dips generally influenced the layer thickness of both membranes. Membrane Y layer thickness through five successive dipping was in the range of 89.2–36μm while Membrane Z ranges between 150.72 and 43.69μm. Gas permeability as a function of mean pressure for Membrane Z was calculated using data obtained experimentally. The permeation tests confirmed the contribution of both Knudsen and viscous flow mechanism with an estimation and prediction of the membrane pore radius.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
