Abstract
Mirror coatings play a crucial role in the performance of laser interferometers devoted to gravitational wave detection such as Virgo and LIGO. Mechanical losses in the coating material limit the sensitivity of the detectors due to the associated mirror thermal noise. The absorption of light in the coating induces a thermal lens in the mirror substrate which reduces the quality of the optical interference and requires sophisticated thermal compensation systems. This paper describes the work ongoing at LMA in order to reduce mechanical losses and optical absorption in the coating. The results obtained by doping Ta2O5 layers and testing different high-index materials are described. Finally the performances of different potential coatings are compared and the results obtained with a 40 kg mirror are reported. Titania doped Ta2O5 shows mechanical losses of 2 × 10−4 and absorption below 0.5 ppm. Nb2O5 appears to be the best competitor from the thermal noise point of view but it has an optical absorption four to five times larger.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
