Abstract
In strain-hardening cementitious composites, the bridging effect of fibers can control crack openings to very small values so the cracks can be self-healed in the presence of water. To rely on autogeneous self-healing to enhance the durability of structures, a method to assess the state of self-healing is required. A new strategy is presented in this paper for in-situ measurement of the healing effect without pre-knowledge of the environmental condition (such as moisture). Exploiting the fact that the electrical conductivity in the crack is lower than that of the undamaged section, the effective macroscopic cracking effect is first distinguished by frequency dependent impedance measurements both along (parallel to) and across the cracks. Dielectric spectroscopy along the cracks is found to correlate well with gravimetric measurements and can therefore, be used for inverse approximation of moisture content. The effect of moisture change on the equivalent resistance in the direction across the cracks can then be derived approximately from measurements under various moisture contents. The approximated resistance vs moisture curve is found to reflect the evolution of autogenous self-healing, and a curve indicating almost complete healing agrees well with the recovery in member stiffness measured from loading test.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.