Abstract

This paper proposes a stereo vision-aided receding horizon vehicle dynamic control system for independent drive vehicles steered by wire. First, we propose the receding horizon vehicle dynamic control (RHVDC) to track the desired slip angle and yaw rate of a dynamic vehicle. The RHVDC computes and updates control inputs at each sampling time to minimize a quadratic cost function over the finite future time horizon, allowing it to address the time-varying property of dynamic vehicles. Its stability is shown to be guaranteed with appropriate parameters. Second, unlike the conventional steering systems fixed with the driver’s steering wheels, the SBW system improves the controllability of vehicle dynamics and enables better tracking performance. Third, combining a stereo vision system with existing sensors allows state estimation of dynamic vehicles to be more accurate in noisy environments. The three strategies mentioned above ultimately maximize the tracking performance of dynamic vehicles through improvement in terms of theory, facilities, and recognition. Through the software-in-the-loop simulation (SILS) with CarSim, the proposed RHVDC system has the better tracking performance for controlling both the slip angle and the yaw rate compared with the existing ones. It is also observed that the performance enhancement of the proposed RHVDC system is more outstanding on slippery or more severe roads.

Highlights

  • V EHICLE dynamic control (VDC), known as yaw moment control (YMC), has been known to be one of the most effective methods of enhancing the stability and safety of vehicles [1, 2]

  • VDCs based on infinite horizon optimal controls were developed to operate with rear-wheel steering (RWS) [8] and external yaw moment generation [3, 9]

  • To maximize the tracking performance of a VDC system, we propose and combine three strategies: a receding horizon VDC scheme, effective steering based on Steer-by-Wire (SBW), and a sensor fusion method with stereo vision

Read more

Summary

INTRODUCTION

V EHICLE dynamic control (VDC), known as yaw moment control (YMC), has been known to be one of the most effective methods of enhancing the stability and safety of vehicles [1, 2]. To maximize the tracking performance of a VDC system, we propose and combine three strategies: a receding horizon VDC scheme, effective steering based on Steer-by-Wire (SBW), and a sensor fusion method with stereo vision. In the VDC, unlike conventional wheel systems following the driver’s steering wheels strictly, the SBW system considers steering wheels as one time-varying control input As a result, it improves the vehicle’s controllability and leads to the better tracking performance of VDCs. Third, a stereo vision system is adopted to more accurately estimate the states of the vehicle. Such helpful stereo vision systems are available since they are pervasive for advanced driver assistant system (ADAS) applications such as auto parking [40], cruise control [41], and collision warning [42].

A CONTROL OBJECTIVE AND THE VDC SYSTEM EQUIPPED WITH SBW
A RECEDING HORIZON VEHICLE DYNAMIC CONTROL LAW
SENSOR FUSION METHOD
Findings
NOISE-FREE MEASUREMENTS
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call