A Step Towards the Impossible – the Combination of High Ionic Conductivity and Mechanical Stability in Highly Crystalline Solid Polyketone Electrolytes

Abstract

Implementation of solid polymer electrolytes (SPEs) is believed to be one pathway forward in the development of lithium-metal batteries (LMBs) that are both safe and possesses high capacities. This combination is possible since the free-standing SPE maintains its mechanical integrity during electrochemical and thermal exposure while utilizing lithium metal as the negative electrode, thus accessing the extremely high theoretical capacity of lithium metal. The main drawback for SPEs are however the poor ionic conductivity compared to the liquid electrolytes used in lithium-ion batteries today.[1] The low ionic conductivity for SPEs stems from the conduction mechanism of the ions, which is a slower process in SPEs compared to in liquid electrolytes. In general, the conductivity in SPEs are confined to the amorphous regions, where segmental motion of the polymer chains facilitates the ion transport; while the crystalline regions restrict the movements of the polymer chains and impairs the ion transport.[2] The highly crystalline polyketone poly(1-oxoheptamethylene) (POHM) is a material that has shown interesting characteristics for implementation as a SPE in batteries. In earlier studies, the polyketone revealed an extensive improvement of the ionic conductivity upon increasing the salt concentration, although the crystallinity remained with a high melting point.[3] Herein this study, the effect of the crystallinity on the characteristics and the performance was investigated further. To understand its effect, a second less hydrogenated version of POHM was synthesized, POHM-75, which is fully amorphous at high salt concentrations. The characteristics of the polyketones were in addition also compared with the more well-studied SPEs, that is polyethylene oxide (PEO) and poly(trimethylene carbonate) (PTMC). Focus of the presentation is on the interplay between the ionic conductivity and mechanical stability for the polyketones, for which something different to the normally observed tradeoff between the two properties is observed. The electrochemical performance of the polyketones are furthermore evaluated when implemented as SPEs in LMBs at extreme temperature environments, a possible application area for mechanically stable SPEs.[1] D. Zhou, D. Shanmukaraj, A. Tkacheva, M. Armand, G. Wang, Chem 2019, 5, 2326-2352.[2] M. A. Ratner, P. Johansson, D. F. Shriver, MRS Bulletin 2011, 25, 31-37.[3] T. Eriksson, H. Gudla, Y. Manabe, T. Yoneda, D. Friesen, C. Zhang, Y. Inokuma, D. Brandell, J. Mindemark, Macromolecules 2022, 55, 10940-10949. Figure 1