Abstract
The steam chamber rising process is an essential feature of steam-assisted gravity drainage. The development of a steam chamber and its production capabilities have been the focus of various studies. In this paper, a new analytical model is proposed that mimics the steam chamber development and predicts the oil production rate during the steam chamber rising stage. The steam chamber was assumed to have a circular geometry relative to a plane. The model includes determining the relation between the steam chamber development and the production capability. The daily oil production, steam oil ratio, and rising height of the steam chamber curves influenced by different model parameters were drawn. In addition, the curve sensitivities to different model parameters were thoroughly considered. The findings are as follows: The daily oil production increases with the steam injection rate, the steam quality, and the degree of utilization of a horizontal well. In addition, the steam oil ratio decreases with the steam quality and the degree of utilization of a horizontal well. Finally, the rising height of the steam chamber increases with the steam injection rate and steam quality, but decreases with the horizontal well length. The steam chamber rising rate, the location of the steam chamber interface, the rising time, and the daily oil production at a certain steam injection rate were also predicted. An example application showed that the proposed model is able to predict the oil production rate and describe the steam chamber development during the steam chamber rising stage.
Highlights
With an increase in oil demand, heavy oil has attracted greater interest from researchers (Diaz, 2001; Head et al, 2003; Miura and Wang, 2012; Syed et al, 2016; Thomas et al, 2001)
We considered the influence of the steam injection rate, the degree of utilization of the horizontal well, and the steam quality on the performance of Steam-assisted gravity drainage (SAGD) during the steam chamber rising stage
This paper proposed a new model to mimic the steam chamber development and predict the oil production rate during the steam chamber rising stage
Summary
With an increase in oil demand, heavy oil has attracted greater interest from researchers (Diaz, 2001; Head et al, 2003; Miura and Wang, 2012; Syed et al, 2016; Thomas et al, 2001).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have