Abstract
There is nothing more fundamental than clean potable water for living beings next to air. On the other hand, wastewater management is cropping up as a challenging task day-by-day due to lots of new additions of novel pollutants as well as the development of infrastructures and regulations that could not maintain its pace with the burgeoning escalation of populace and urbanizations. Therefore, momentous approaches must be sought-after to reclaim fresh water from wastewaters in order to address this great societal challenge. One of the routes is to clean wastewater through treatment processes using diverse adsorbents. However, most of them are unsustainable and quite costly e.g. activated carbon adsorbents, etc. Quite recently, innovative, sustainable, durable, affordable, user and eco-benevolent Geopolymer composites have been brought into play to serve the purpose as a pretty novel subject matter since they can be manufactured by a simple process of Geopolymerization at low temperature, lower energy with mitigated carbon footprints and marvellously, exhibit outstanding properties of physical and chemical stability, ion-exchange, dielectric characteristics, etc., with a porous structure and of course lucrative too because of the incorporation of wastes with them, which is in harmony with the goal to transit from linear to circular economy, i.e., “one’s waste is the treasure for another”. For these reasons, nowadays, this ground-breaking inorganic class of amorphous alumina-silicate materials are drawing the attention of the world researchers for designing them as adsorbents for water and wastewater treatment where the chemical nature and structure of the materials have a great impact on their adsorption competence. The aim of the current most recent state-of-the-art and scientometric review is to comprehend and assess thoroughly the advancements in geo-synthesis, properties and applications of geopolymer composites designed for the elimination of hazardous contaminants viz., heavy metal ions, dyes, etc. The adsorption mechanisms and effects of various environmental conditions on adsorption efficiency are also taken into account for review of the importance of Geopolymers as most recent adsorbents to get rid of the death-defying and toxic pollutants from wastewater with a view to obtaining reclaimed potable and sparkling water for reuse offering to trim down the massive crisis of scarcity of water promoting sustainable water and wastewater treatment for greener environments. The appraisal is made on the performance estimation of Geopolymers for water and wastewater treatment along with the three-dimensional printed components are characterized for mechanical, physical and chemical attributes, permeability and Ammonium (NH4+) ion removal competence of Geopolymer composites as alternative adsorbents for sequestration of an assortment of contaminants during wastewater treatment.
Highlights
Geopolymers are a class of ceramic-like inorganic polymers analogous to the Felspathoid family of minerals in their mineralogical attributes, which can be developed at a considerably low temperature of below 100 ◦ C and merely at atmospheric pressure by means of an exothermal process of geopolymerization, i.e., through a polycondensation reaction obtained by alkali activation of an alumina-silicate source as a precursor, such as aluminasilicate minerals [21] or industrial wastes, e.g., fly ash, ground granulated blast furnace slag (GGBFS), coal gangue, red mud, etc., and alkali-activating solutions as activators, viz., sodium hydroxide (NaOH), sodium water glass (Na2 SiO3 ), etc., in this process, which is known as “geo-synthesis”, formulating amorphous polymers possessing the chains or networks of mineral molecules linked to covalent bonds [22]
With a view to having pure potable drinking water for all the human beings and lives on the planet, the approach of water and wastewater treatment is highly essential to hit the goal of the reuse of reclaimed water
The diverse methods to clean water by removing impurities of extremely perilous and noxious heavy metal ions are widespread for wastewater treatment; geopolymer technology seems to be highly appreciated and promising through its adsorbent composites
Summary
Introduction of GeopolymersGeopolymers are a class of ceramic-like inorganic polymers analogous to the Felspathoid family of minerals in their mineralogical attributes, which can be developed at a considerably low temperature of below 100 ◦ C and merely at atmospheric pressure by means of an exothermal process of geopolymerization, i.e., through a polycondensation reaction obtained by alkali activation of an alumina-silicate source as a precursor, such as aluminasilicate minerals [21] (metakaolin) or industrial wastes, e.g., fly ash, ground granulated blast furnace slag (GGBFS), coal gangue, red mud, etc., and alkali-activating solutions as activators, viz., sodium hydroxide (NaOH), sodium water glass (Na2 SiO3 ), etc., in this process, which is known as “geo-synthesis”, formulating amorphous polymers possessing the chains or networks of mineral molecules linked to covalent bonds [22]. Geopolymerization occurs in three separate but interrelated stages—firstly, the dissolution, i.e., alumina-silicate precursors, get dissolved in an alkali activator solution in order to form free AlO4 and SiO4 tetrahedral units; secondly, the condensation, whereby two tetrahedral units form a long chain because of the condensation reaction kinetics; and thirdly, the poly-condensation reactions stage wherein the reactions among the long chains to produce gel-like materials, which are mainly amorphous N–A–S–H The rock-hardened rigid material developed which contains an amorphous three dimensional (3D) structure comprising of AlO4 — and SiO4 -tetrahedra linked alternatively by sharing oxygen (O) atoms, coined as poly-sialates by French scientist Joseph. The vital phase is of hydrated sodium alumina-silicates (N–A–S–H) gel, which is a flowable paste, and it is a network built of silicon (Si) and aluminum (Al) tetrahedra, linked together through oxygen bridges. Cations of Na+, K+ , Li+ , Ca2+ , etc., must be present in the voids of the poly-sialate with a view to balancing the negative charge of the tetravalent aluminum (Al)
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
