A SPC strategy for decision making in manufacturing processes

Abstract

Tapping is an extensively employed manufacturing process by which a multi-teeth tool, known as tap, cuts a mating thread when driven into a hole. When taps are new or slightly worn the process is usually in control and the geometry of the resulting threads on the work piece is correct. But as the tap wear increases the thread geometry deviates progressively from the correct one and eventually the screw threads become unacceptable.The aim of this paper consists on a development of statistical process control strategy for decision making according to data coming from the current signal of the tap spindle for assessing thread quality. It could operate on line and indicates when the tap wear is so critical that, if the process were continued, it would result in unacceptable screw threads. The system would be very cost-effective since the tapping process could be run without any operator intervention.