Abstract
The presence of spoofing signals poses a significant threat to global navigation satellite system (GNSS)-based positioning applications, as it could cause a malfunction of the positioning service. Therefore, the main objective of this paper is to present a spatial-temporal technique that enables GNSS receivers to reliably detect and suppress spoofing. The technique, which is based on antenna array, can be divided into two consecutive stages. In the first stage, an improved eigen space spectrum is constructed for direction of arrival (DOA) estimation. To this end, a signal preprocessing scheme is provided to solve the signal model mismatch in the DOA estimation for navigation signals. In the second stage, we design an optimization problem for power estimation with the estimated DOA as support information. After that, the spoofing detection is achieved by combining power comparison and cross-correlation monitoring. Finally, we enhance the genuine signals by beamforming while the subspace oblique projection is used to suppress spoofing. The proposed technique does not depend on external hardware and can be readily implemented on raw digital baseband signal before the despreading of GNSS receivers. Crucially, the low-power spoofing attack and multipath can be distinguished and mitigated by this technique. The estimated DOA and power are both beneficial for subsequent spoofing localization. The simulation results demonstrate the effectiveness of our method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.