Abstract
A voltage-sourced rectifier control scheme for use with AC/DC/AC variable speed drives is presented. A control scheme is derived that directly calculates the duration of time spent on the zero state and on each switching state adjacent to the reference vector, over a constant switching interval, in order to drive the line current vector to the reference vector. In addition, under transient conditions, when deadbeat control is not possible, a control scheme is presented that ensures that the line current vector is driven in the direction of the reference current vector. The current reference for the rectifier controller is derived from the bus voltage error and a feedforward term based on the estimated converter output power. The proposed space vector-based rectifier regulator is shown to exhibit improved harmonic and transient performance over existing per-phase duty cycle prediction methods, especially at modulation indices near unity. The deadbeat control of the rectifier input current is accomplished every half-cycle with constant switching frequency while still symmetrically distributing the zero state within the half-cycle period. >
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.