A solar energy desalination analysis tool, sedat, with data and models for selecting technologies and regions

This project developed a user-friendly, open-source, software that enables a comparative evaluation of solar thermal desalination technology options and employs geospatial data layers to identify regions of high-potential for solar thermal desalination. This was accomplished by integrating solar models with desalination models and enhancing their utility by providing GIS-based data inputs. The developed Solar Energy Desalination Analysis Tool (SEDAT) enables techno-economical evaluation of desalination technologies and selection of regions with the highest potential for using solar energy to power desalination plants. It simplifies the planning, design, and valuation of solar thermal and solar hybrid desalination systems in the U.S. and worldwide. SEDAT uses Dash for integrating various layers of large volumes of GIS data with Python-based models of solar energy generation and desalination technologies. It derives time-series of energy generation and water production, with details of plant performance and suggestions for improving the solar-desalination coupling. It is a one of-a-kind tool of analysis representing a definitive advancement in the state-of-the-art. Of solar desalination modeling This report summarizes the various phases of the tool’s development, and presents examples of the results.

Solar desalination has emerged as a sustainable solution for addressing global water scarcity in the energy-water nexus, particularly for remote areas in developing countries. How to use the light spectrum through solar devices can profoundly affect the solar energy utilization, desalination rates, off-grid applicability, and water affordability. Solar photovoltaic (PV) and solar thermal (ST) respectively have enabled a variety of interesting solar desalination technologies, but the resulting applications usually limit the integration between solar and desalination to be either electrically or thermally connected. Here this review paper explores smart co-uses of heat and electricity from the sun to improve the efficiency, productivity, and independence of various solar desalination processes. It is found that coupling solar photovoltaic-thermal (PVT) with desalination could be a practical and immediately deployable route for plausibly more sustainable solar desalination than current solutions, because the combined electrical and thermal energy outputs from PVT panels could be used synergistically to catalyze the improvement on the solar energy efficiency, specific energy consumption, and specific water production, as well as the operational independence for off-grid applications. Our preliminary analysis indicated an up to 20 % lower cost of PVT-desalination than current solar PV-desalination and ST-desalination but also with challenges discussed.

Desalination processes are energy consuming and it is required to apply clean energy sources for supplying them to prevent environmental issues. Solar energy is one of the attractive clean energy sources for desalination. In solar thermal desalination systems, different thermal components could be used for heat transfer purpose. In solar desalination technologies, heat pipe as efficient heat transfer mediums could be employed to transfer absorbed and/or stored thermal energy. The objective of this study is to review applications of heat pipes in solar energy desalination systems. Regarding the performance dependency of these thermal systems on the variety of factors, scholars have investigated these systems by consideration of the effect of different influential factors. Based on the results, it is concluded that use of heat pipes could lead to proper performance of solar desalination systems. Aside from direct transfer of absorbed heat from solar radiation, heat pipes can be applied in the storage units of solar desalination systems to keep the systems active in night-hours or low solar irradiation conditions. The overall performance of the solar desalinations systems with heat pipes can be influenced by some factors such as filling ratio and operating fluid that affect the performance of heat pipes.

Chapter 8 - Nanoparticles-enhanced energy storage materials in solar thermal desalination

Advances in solar desalination using 2D and biomass derived materials: A roadmap to sustainability

Technology development and application of solar energy in desalination: MEDRC contribution

Recent decades have seen a shortage of water, which has led scientists to concentrate on solar desalination technologies. The present study examines the solar water desalination system with inclined steps, while considering various phase change materials (PCMs). The findings suggest that the incorporation of PCM generally enhances the productivity of the solar desalination system. Additionally, the combination of nanoparticles has been used to PCM, which is a popular technique utilized nowadays to improve the efficiency of these systems. The current investigation involves the transient modeling of a solar water desalination system, utilizing energy conservation equations. The equations were solved using the Runge-Kutta technique of the ODE23s order. The temperatures of the salt water, the absorbent plate of the glass cover, and the PCM were calculated at each time. Without a phase changer, the rate at which fresh water is produced is around 5.15 kg/m2·h. The corresponding mass flow rates of paraffin, n-PCM I, n-PCM III, n-PCM II, and stearic acid are 22.9, 28.9, 5.9, 11.9, and 73 kg/m2·h. PCMs, with the exception of stearic acid, exhibit similar energy efficiency up to an ambient temperature of around 29°. However, at temperatures over 29°, n-PCM II outperforms other PCM.

In this review, the new solar water treatment technologies, including solar water desalination in two direct and indirect methods, are comprehensively presented. Recent advances and applications of five major solar desalination technologies include solar-powered humidification–dehumidification, multi-stage flash desalination, multi-effect desalination, RO, and solar stills. Each technology’s productivity, energy consumption, and water production costs are presented. Also, common methods of solar water disinfection have been reviewed as one of the common and low-cost methods of water treatment, especially in areas with no access to drinking water. However, although desalination technologies have many social, economic, and public health benefits, they are energy-intensive and negatively affect the environment. In addition, the disposal of brine from the desalination processes is one of the most challenging and costly issues. In this regard, the environmental effects of desalination technologies are presented and discussed. Among direct solar water desalination technologies, solar still technology is a low-cost, low-tech, and low-investment method suitable for remote areas, especially in developing countries with low financial support and access to skilled workers. Indirect solar-driven water desalination technologies, including thermal and membrane technologies, are more reliable and technically more mature. Recently, RO technology has received particular attention thanks to its lower energy demand, lower cost, and available solutions to increase membrane durability. Disposal of brines can account for much of the water cost and potentially negatively affect the environment. Therefore, in addition to efforts to improve the efficiency and reduce the cost of solar technologies and water treatment processes, future research studies should consider developing new solutions to this issue.

Kesterite Cu2ZnSnS4 thin-film solar water-splitting photovoltaics for solar seawater desalination

Integrated strategy of solar evaporator and steam collector configurations for interfacial evaporation water purification

<abstract> <p>This review is inspired by the increasing shortage of fresh water in areas of the world, and is written in response to the expanding demand for sustainable technologies due to the prevailing crisis of depleting natural water resources. It focuses on comprehending different solar energy-based technologies. Since the increasing population has resulted in the rising demand for freshwater, desalination installation volume is rapidly increasing globally. Conventional ways of desalination technologies involve the use of fossil fuels to extract thermal energy which imparts adverse impacts on the environment. To lessen the carbon footprint left by energy-intensive desalination processes, the emphasis has shifted to using renewable energy sources to drive desalination systems. The growing interest in combining solar energy with desalination with an emphasis on increasing energy efficiency has been sparked by the rapid advancements in solar energy technology, particularly solar thermal. This review paper aims to reflect various developments in solar thermal desalination technologies and presents prospects of solar energy-based desalination techniques. This paper reviews direct and indirect desalination techniques coupled with solar energy, and goes on to explain recent trends in technologies. This review also summarizes the emerging trends in the field of solar thermal desalination technologies. The use of nanoparticles and photo-thermal materials for localized heating in solar desalination systems has decreased energy consumption and enhanced the efficiency of the system. Solar power combined with emerging processes like membrane distillation (MD) has also a recent resurgence.</p> </abstract>

Most of the desalination technologies consume a huge quantity of energy resulting from petroleum products in the form of heat or electrical energy. Solar desalination is a promisingly sustainable freshwater production technology. Solar desalination humidification dehumidification process showed the best approach as it is of the highest overall energy efficiency. In this review paper, a detailed study of the previous work is performed on solar humidification dehumidification desalination techniques experimentally and theoretically. Also in this review, different types of HDH systems were mentioned. The review showed that the humidification dehumidification desalination systems are suitable for decentralized demand. On the other hand, capacity of HDH units is not as large as conventional methods or small as solar stills. Finally, this study threw light on the scope of the parameters which have a considerable influence on increasing the freshwater output of the HDH systems as feed water flow rate, air flow rate, and design of the evaporator, condenser, and packing material. A brief economical study and a comparison of the costs per liter are performed for various humidification dehumidification desalination systems presented in this study.

Because it is able to produce desalinated water directly using solar energy with minimum carbon footprint, solar steam generation and desalination is considered one of the most important technologies to address the increasingly pressing global water scarcity. Despite tremendous progress in the past few years, efficient solar steam generation and desalination can only be achieved for rather limited water quantity with the assistance of concentrators and thermal insulation, not feasible for large-scale applications. The fundamental paradox is that the conventional design of direct absorber-bulk water contact ensures efficient energy transfer and water supply but also has intrinsic thermal loss through bulk water. Here, enabled by a confined 2D water path, we report an efficient (80% under one-sun illumination) and effective (four orders salinity decrement) solar desalination device. More strikingly, because of minimized heat loss, high efficiency of solar desalination is independent of the water quantity and can be maintained without thermal insulation of the container. A foldable graphene oxide film, fabricated by a scalable process, serves as efficient solar absorbers (>94%), vapor channels, and thermal insulators. With unique structure designs fabricated by scalable processes and high and stable efficiency achieved under normal solar illumination independent of water quantity without any supporting systems, our device represents a concrete step for solar desalination to emerge as a complementary portable and personalized clean water solution.

Technical and economical aspects of solar desalination with particular emphasis on solar pond powered distillation plants

Solar still is the process by which salt water can be converted into a useful form. Climate change and continued global freshwater consumption have put pressure on groundwater resources continuously extracted for decades. This has compelled researchers to work on alternative resources that meet the need for fresh water in the near future, which alternatively reduces the dependence on groundwater and converts it from available resources to provide fresh water. Also helps which might otherwise go unused. The current paper reviews the performance analysis of the solar desalination system. It is used in many applications, especially in solar energy desalination technologies. The paper focuses on the passive and active solar still technologies and their related thermal performance analysis with suitable outcomes. Along with this, the benefits of using nanofluids are also highlighted from the positive perspective on the desalination system.