Abstract

Ultrasonic water meters have current widespread problems of poor site adaptability, low measurement accuracy, and poor stability. A high-precision intelligent ultrasonic water meter with self-diagnosis function and adaptive technology was proposed in this paper, which is focus on improving the measurement accuracy and repeatability of the small pipe diameters. The hardware circuit design of the ultrasonic water meter studied in this paper adopts the low-power STM32L053 microcontroller with Cortex-M0 core architecture and the high-precision 11 ps time resolution timing chip TDC-GP30 to complete the metering function. The software combines pulse width ratio and amplitude voltage measurement technology to make the water meter have self-diagnosis function, avoid measurement errors caused by accidental factors, improve adaptability and measurement accuracy, also the application of adaptive measurement period method is used to improve measurement repeatability. The software adopts the moving average filtering algorithm, which effectively reduces the fluctuation of the time-of-flight(ToF) difference and improve the measurement accuracy of the flow point in the low zone (between the minimum flow and the boundary flow). The experimental verification results show that the accuracy of the small-caliber ultrasonic water meter can reach within ±1.5 %, and the repeatability is less than 0.5 %. In the face of fluid disturbances, adaptive technology is used in this water meter to adjust the measurement period and carry out self-diagnostic function research, and automatically respond to deal with abnormal faults, thereby realizing the demand for intelligence.

Highlights

  • The ultrasonic water meter is a new type of electronic water meter based on the measurement principle of the time-offlight (ToF) difference method [1]

  • EXPERIMENTAL DEVICE A prototype of a small diameter ultrasonic water meter with self-diagnosis function and self-adaptive technology, which is mainly composed of integrated transducer pipeline, hardware circuit board, LCD display, large-capacity battery, etc

  • The ordinary ultrasonic water meter without selfdiagnosis function and adaptive technology and the new ultrasonic water meter with self-diagnosis function and selfadapting technology are connected in series on the pipeline of the verification equipment

Read more

Summary

INTRODUCTION

The ultrasonic water meter is a new type of electronic water meter based on the measurement principle of the time-offlight (ToF) difference method [1]. Under the working conditions of the water flow, by detecting the ToF difference caused by the speed change of the ultrasonic sound beam traveling in the water upstream and downstream, it is analyzed and processed to obtain the water velocity to calculate the water flow. This information is stored and displayed on the electronic instrument [2], [3]. Difference, removes the spikes with large fluctuations, and improves measurement accuracy [16]

OVERALL SYSTEM DESIGN
SOFTWARE DESIGN
EXPERIMENTAL DATA
CONCLUSION
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call