A Skin‐Inspired Triboelectric Nanogenerator with an Interpenetrating Structure for Motion Sensing and Energy Harvesting

Abstract

AbstractRapid advancements in wearable electronics impose the challenge on power supply devices. Herein, a flexible single‐electrode triboelectric nanogenerator (SE‐TENG) that enables both human motion sensing and biomechanical energy harvesting is reported. The SE‐TENG is fabricated by interpenetrating Ag‐coated polyethylene terephthalate (PET) nanofibers within a polydimethylsiloxane (PDMS) elastomer. The Ag coating and PDMS are performed as the electrode and dielectric material for the SE‐TENG, respectively. The Ag‐coated PET nanofibers enlarge the electrode surface area, which is beneficial to increase sensing sensitivity. The flexible SE‐TENG sensor shows the capability of outputting alternating electrical signals with an open‐circuit voltage up to 50 V and a short‐circuit current up to 200 nA in response to externally applied pressure. It is used to sense various types of human motions and harvest electric energy from body motion. The harvested energy can successfully power wearable electronics, such as an electronic watch and light‐emitting diode. Therefore, the as‐prepared SE‐TENG sensor with a pressure response and self‐powered capability provides potential applications in wearable sensors or flexible electronics for personal healthcare and human–machine interfaces.