Abstract
A single-layer filtering hybrid antenna with low profile and high selectivity is presented. The proposed antenna is composed of a triangular patch and a substrate integrated waveguide (SIW) cavity with triangular slot and U-shaped slot etched on the top surface. The patch is embedded in the triangular slot. Four modes can be generated by the hybrid structure. That is, the TM <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</sub> mode of the patch, the right half-TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sub> , the modified right half-TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sub> and the TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1.5, 1</sub> modes of the SIW cavity are selected. By merging the four modes into a single passband, the impedance bandwidth is broadened, and the frequency selectivity is enhanced. There are two radiation nulls at the lower and upper edges of the passband, which can be controlled independently. In addition, part of the shorting pins surrounding the SIW cavity is truncated to decrease the operating frequency and increase the out-of-band rejection. The measured –10 dB impedance bandwidth ranges from 3.44 to 3.62 GHz with sharp frequency selectivity and more than 18 dB out-of-band suppression level.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
