A Single Layer Glucose Fuel Cell Intended as Power Supplying Coating for Medical Implants

Abstract

AbstractWe present a novel type of abiotically catalysed implantable glucose fuel cell with anode and cathode placed side by side, using a Raney‐platinum glucose oxidation anode with high tolerance towards oxygen. In contrast to conventional assembly designs used for implantable glucose fuel cells, no permeable cathode mounted in front of the anode to effect oxygen depletion is required. At 2.2 ± 0.1 μW cm–2 the single layer fuel cell exhibits only half the maximum power density of the conventional fuel cell, which solely stems from the doubled total fuel cell area demand. Nevertheless, the novel single layer design is advantageous in terms of simplified fabrication and reduced overall thickness, facilitating implementation of the fuel cell as a power supplying coating directly on the surface of medical implants. Furthermore, the single layer design offers an attractive possibility to diminish the reduction of power density by limited oxygen mass transfer to the cathode by increasing the cathode to anode area proportion. With doubled cathode area proportion a by 36% higher power density can be reached. To calculate the optimum cathode to anode area proportions, we introduced an analytical model based on the experimentally determined polarisation resistances of the individual electrodes.