A single‐layer differential‐fed dual‐band filtering antenna for WLAN application

Abstract

AbstractIn this letter, a single‐layer differential‐fed dual‐band filtering antenna for wireless local area network application is proposed. The proposed antenna consists of a square patch, and two pairs of stepped impedance resonators (SIRs). The lower operating passband is realized by exciting the square patch with a pair of differential ports. Then, a pair of SIRs is connected with the radiating edge of the square patch to introduce another resonance, thus forming the upper passband. And a radiation null is simultaneously produced to enhance the frequency selectivity between the two passbands. Moreover, another pair of SIRs is utilized to connect with the nonradiating edge of the square patch, which generates an additional high‐frequency in‐band resonance and a radiation null to further improve the bandwidth and frequency selectivity of upper passband. The developed prototype was fabricated and measured to verify the design concept. The measured results are in good agreement with the simulated ones, demonstrating that it exhibits −10 dB fractional impedance bandwidths of 3.68% and 7.35%, maximum realized gains at boresight direction of 5.5 and 8.7 dBi, and cross‐polarization levels smaller than −30 dB, in lower and upper passbands, respectively.