Abstract
This paper reports on a multi-element relaxor ferroelectric single crystal (RFSC) based acoustic emission (AE) sensor called LAMDA (linear array for modal decomposition and analysis). This sensor is being developed foracoustic-signature detection applications, including for AE-based damage detection on space-based and undersea platforms. RFSC [011] Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (or PIN-PMN-PT) was machined into 200 μm thick × 1 mm long × 4 mm wide elements, with 16 of these elements arranged on a flexible-polyimide-carrier to form a LAMDA. This sensor was bonded to a 1.6 mm thick aluminium plate with dimensions 600 mm x 600 mm. Acoustic emissions consisting of Lamb waves (e.g., A0, S0) were generated in the plate using both piezoceramic (Pz26) disk-actuators and pencil lead breaks (PLBs). LAMDA measurements and one-dimensional laser-vibrometry were undertaken on the plate and compared with two-dimensional multi-physics model predictions. The plane-strain model geometry comprised a rectangular-section 1.6 mm thick and 600 mm long with a LAMDA located centrally. An AE, being a 5.5-cycle Hann-windowed function with centre-frequencies 300–1000 kHz, was introduced 150 mm from the LAMDA via point loading perpendicular to the surface. The Lamb wave dispersion-curves generated from the model showed good agreement with the experimental curves determined from LAMDA and laser-vibrometry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
