Abstract
The main aim of the present research was to obtain an optimized microstructure with adequate mechanical properties in a low carbon steel. The effect of microstructure on kinetics of austenite transformation was simulated. A 3.2mm hot rolled steel was subjected to continuous annealing to obtain properties of Dual Phase 590 grade. Kinetics of austenite transformation was studied with respect to the condition of just pearlite dissolution to form austenite under rapid heating. Annealing parameters were based on process conditions of dual phase steel production in a continuous annealing line. DICTRA was used to simulate heating rates of the order 10–500°C/s with peak temperatures in the range 750–850°C to predict isothermal annealing time required for complete dissolution of pearlite into austenite under different temperature-heating rate conditions. Simulation results showed dependency of temperature and heating rate on austenite transformation time. Interestingly, no significant effect of heating rate on complete pearlite dissolution into austenite was evident. Results were validated with limited experimentation on Gleeble. Microstructure analysis validated the simulation results to be accurate. The observations have pertinent inputs while designing industrial continuous annealing line parameters where rapid heating rates are generally encountered (10–20°C/s).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
