Abstract
The use of small scale vertical axis turbines (VAWTs) in the urban environment is becoming increasingly popular. VAWTs are usually supported on steel masts to increase their efficiency. The resonance between the supporting masts and the VAWTs can disturb the power generation and trigger potential fatigue issues in the mast structure. As the turbine itself influences greatly the free vibration modes of the mast, VAWTs should not be modelled as a single lumped mass during a dynamic analysis. A simplified analytical model of an H-Darrieus VAWT is developed to allow the dynamic analysis of the supporting masts taking into account the coupling of the mast and turbine. The VAWT has a height of 5m, a diameter of 3m and a power output of 6kW whereas the height of the masts ranges between 3 and 15m. The coupled structure is analysed both analytically, through a multi-degree of freedom system, as well as numerically through the finite element (FE) method. The correlation of the estimated natural frequencies of the system through the FE method with site measurements was found to be within 10% and can allow designing adequately the mast. Harmonic forces representative of the turbine out of balance and cyclic aerodynamic forces are proposed and used to predict peak acceleration at resonance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
