Abstract

BackgroundFed-batch fermentation has been conventionally implemented for the production of lactic acid with a high titer and high productivity. However, its operation needs a complicated control which increases the production cost.ResultsThis issue was addressed by simplifying the production scheme. Escherichia coli was manipulated for its glycerol dissimilation and d-lactate synthesis pathways and then subjected to adaptive evolution under high crude glycerol. Batch fermentation in the two-stage mode was performed by controlling the dissolved oxygen (DO), and the evolved strain deprived of poxB enabled production of 100 g/L d-lactate with productivity of 1.85 g/L/h. To increase productivity, the producer strain was further evolved to improve its growth rate on crude glycerol. The fermentation was performed to undergo the aerobic growth with low substrate, followed by the anaerobic production with high substrate. Moreover, the intracellular redox of the strain was balanced by fulfillment of the anaerobic respiratory chain with nitrate reduction. Without controlling the DO, the microbial fermentation resulted in the homofermentative production of d-lactate (ca. 0.97 g/g) with a titer of 115 g/L and productivity of 3.29 g/L/h.ConclusionsThe proposed fermentation strategy achieves the highest yield based on crude glycerol and a comparable titer and productivity as compared to the approach by fed-batch fermentation. It holds a promise to sustain the continued development of the crude glycerol-based biorefinery.

Highlights

  • Fed-batch fermentation has been conventionally implemented for the production of lactic acid with a high titer and high productivity

  • To enhance the synthesis of d-lactate, the strain was equipped with a genomic copy of the λPL promoter (PλPL)-driven d-ldh from Lactobacillus helveticus at pflCD

  • The strain was deprived of dld and mgsA, which renders it unable to metabolize the enantiomerical purity of d-lactate

Read more

Summary

Introduction

Fed-batch fermentation has been conventionally implemented for the production of lactic acid with a high titer and high productivity. Recognized as an eco-friendly material, polylactide (PLA) made from d- or l-lactic acid is featured with biocompatibility and processability [1]. PLA naturally hydrolyzes to the non-toxic constituent of α-hydroxy acid, which renders it appealing for biomedical applications [2]. PLA can be processed in a mold due to its thermoplastic nature. The stereocomplex PLA composed of poly d- and l-lactic acid displays a superior performance in terms of thermal stability and mechanical strength [4]. It has a potential application in the electronic sector and the automobile industry [5]

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call