Abstract
Effective density measurements are used extensively to convert submicron particle sizes based on a particle׳s mobility diameter into mass. Measurements of the effective density also provide information concerning the particle morphology. For example, the effective density curves of fractal aggregates reveal a scaling factor that seems to correlate with the fractal dimension of the particles. The present paper proposes a simple semi-empirical model that permits the quantitative interpretation of these measurements to determine parameters such as the fractal dimension, the primary particle size, and the bulk density of an aggregate particle. The proposed model is based on the assumption that the hydrodynamic drag force of an aggregate is proportional to the drag force applied to isolated primary spheres and to the number of primary spheres in the aggregate at power α. The model was applied to soot particles produced by either a spark discharge (PALAS GFG1000) or by combustion (miniCAST 5206)—both mechanisms enable the generation of aggregates or agglomerates with very different primary sphere diameters. The proposed model showed a good fit for all of the effective density measurements obtained in this study; the α parameter was driven by the aggregate fractal dimension and by the Knudsen number that was determined based on the primary particle diameter. Finally, for a known primary particle diameter, the fractal dimension and the bulk density were determined successfully with the proposed model.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.